MIX TWISTED Wire – Kanthal A1 – 118mm Length (Pack of 10)
MIX TWISTED wire is a cool vape coil configuration, consisting of a single 26GA wire (round wire) twisted with one 0.2 x 0.8 ribbon wire (flat wire). This pack of MIX TWISTED vape wires are made from Kanthal A1 and each wire is 118mm long. There are 10 wires in each pack.
INFORMATION ABOUT KANTHAL A1 VAPE WIRE
Kanthal A1 is a very common resistance wire used for making coils for vaping. Kanthal A1 can be used in wattage mode (not temperature control mode) and it is available in various gauges. Making vape coils with Kanthal A1 wire is really very easy.
Use a little screwdriver or a vape coil jig to tightly make your wraps. Most coils are wound at around 3mm (approx. 2-3.5mm) in diameter and this will depend on the amount of available space on your vape tank coil build deck. If you are using a suitable gauged wire then coils usually have about 5 wraps, but anything from 3 to 7 wraps can also work. The more wraps you make the higher the resistance will be.
Making your own vape coils can take a little bit practice to get it right, but the advantage is that you have full control of the coil resistance and you can tweak the wicking to ensure the e-liquid reaching the coil perfectly. Kanthal A1 is a (heating) resistance wire and is widely used in the vape industry.