Arizer XQ2 Vaporizer

Arizer XQ2 Vaporizer

The XQ2 is the new feature packed desktop unit from Arizer. The Arizer XQ2 is the culmination of 15 years of customer feedback driven design. Suitable for users of any experience level, the XQ2 includes a whip attachment, balloon bag and a bunch of other great parts and accessories, even including a handy remote control. The new heating chambers have borosilicate glass screens which make it easy to keep your vapour pure, as well as an updated balloon system with silicone caps for longer vapour retention. The XQ2 uses a convection heating system with a temperature range of 50ºC-260°C, so heating the dried flower is nice and even and getting the right temperature is super easy. The new addition of the LED base light to indicate when it’s heating and when it’s ready to use, makes using the XQ2 nice and simple.

Key Features: Arizer XQ2 Vaporizer

• Convection Heating Chamber
• 1 Minute Warm up
• Whip and Balloon Attachment
• LED Temp/Heating Indicator Light
• Digital Screeen
• Remote Control

Box Incudes: Arizer XQ2 Vaporizer

• 1 x Arizer XQ2 Vaporizer
• 1 x Power Adapter and Cord
• 1 x Remote Control
• 2 x Glass Connoisseur Bowls
• 2 x Glass Tuff BowlGrips
• 1 x Glass Aromatherapy Dish
• 1 x 3’ Whip (Silicone)
• 1 x Glass Mini Whip w/ Dome Screen
• 1 x Frosted Glass Balloon Mouthpiece
• 1 x Balloon Connector
• 2 x Balloon Bags
• 1 x Balloon Cap
• 1 x Air Filter Cartridge w/ Filter
• 1 x Stainless Steel Stirring Tool
• 1 x Flat Screen
• 1 x Owner’s Manual

How To Use: Arizer XQ2 Vaporizer

Please read the instructions provided in the box before using the Arizer XQ2 Vaporizer.

Step 1: Turning the device on/off

Press the Power button to instantly turn the unit on and off. Hold for 2 seconds to start the unit of the Delay start setting is activated. The unit will beep once when turned on/off when audio is activated.

Step 2: Setting your temperature

The Up and Down arrows are dedicated to adjusting temperature settings. There are three programmable temperature preset buttons. The preset button default temperatures are 170c/185c/200c. To reprogram the presets, set the temperature you would like to save. then press and hold the chosen button (1,2,3) until you hear a beep.

Step 3: Loading the material

Coarsely grind the desired amount of material and load it into the top of the Connoisseur Bowl . Do not load or pack the bowl too tightly or airflow could be restricted.

Step 4: Allow the device to heat up/Inhale

Attach the Glass Connoisseur Bowl to the unit, then attach the 3’Whip to the bowl. Wait for approximately 3-5 minutes to prime the material for use. Inhale through the glass mouthpiece in a slow and steady draw. Periodically stirring the bowl contents will help get the most out of your material. Use the provided stirring tool to stir the material in the chamber. Remove the bowl from the unit before stirring.

How To Clean: Arizer XQ2 Vaporizer

Step 1: Disassemble the device

Unplug unit from outlet before cleaning. Let the unit and all parts cool down before handling or cleaning. When cleaning any glass, do not expose hot glass parts to cold water or extreme temperature change as this will cause cracking and breaking of the glass. All parts and screens are removable for ease of cleaning.

Step 2:  Remove residue

Regular Isopropyl Rubbing Alcohol, cotton swap, pipe cleaners, etc. can be used to clean and sterilize. Do not soak the tubing in alcohol as it may absorb the smell/taste. All glass and metal screens are safe to soak. When parts are clean, rinse thoroughly under hot water and repeat if necessary.

Step 3: Reassemble the vaporizer

Make sure all the glass parts and accessories are fully dry before the next use.

How To Replace the Air Intake Filter: Arizer XQ2 Vaporizer

Unplug the ARIZER XQ2 and ensure that all parts have fully cooled. Turn it upside down and pull the tab on the bottom of the unit to open the air filter compartment. Remove the plastic Air Filter Cartridge by grasping the two finger holes. Insert your finger in the large opening and pull off the perforated cover (exposing the white filter) and remove the old filters. Insert the new black filter into the Cartridge, then place the second filter with white side facing out. Replace the top of the cartridge, ensuring the two tabs snap into place inside. Place the Cartridge back into the bottom of the Arizer XQ2 with the two finger holes facing outward. Close the air filter compartment cover down until both tabs lock with an audible click.