Out Of Stock

Eleaf iStick Pico 75W TC Starter Kit

Out of stock


Eleaf iStick Pico 75W TC Starter Kit

The Eleaf iStick Pico Kit is the Eleaf iStick Pico Mod and the Eleaf Melo 3 Mini Tank combined. The Melo 3 (Mini) Tank is top filling and has hidden bottom adjustable airflow. The Melo 3 Mini Tank uses the Eleaf EC Replacement Coils.

The Eleaf iStick Pico Mod is a small little device with temperature control and a 75W maximum power output. In temperature control mode, the iStick Pico can reach 600 degrees fahrenheit and can fire resistances as low as 0.05 Ohm. This mod supports nickel, titanium, and stainless steel wire in temperature control mode. There are also three memory presets that can be used to save your most used settings. Constructed with zinc alloy, this mod is light weight and uses ones high amp 18650 battery (battery sold separately).


Eleaf iStick Pico 75W TC Starter Kit Colour Options

  • Classic Black
  • Full Black
  • Brushed Stainless Steel
  • Silver

Eleaf iStick Pico 75W TC Starter Kit Features

  • Eleaf iStick Pico Mod Features
  • Wattage Range: 1 – 75W
  • Temperature Range: 200 – 600 degrees Fahrenheit
  • Resistance Range TC Mode: 0.05 – 1.5 Ohm
  • Resistance Range VW Mod: 0.1 – 3.5 Ohm
  • Modes: VW, Bypass, TC-Ni, TC-Ti, TC-SS
  • Three memory pre-sets
  • Stealth mode
  • OLED screen
  • Requires 1x 18650
  • Firmware upgradeable
  • Spring-loaded 510 connector
  • Material: Zinc Alloy
  • Brass contact
  • Battery vent holes

Eleaf Melo 3 Mini Tank Features

  • 22mm Diameter
  • 2ml Tank Capacity
  • Top Fill System
  • Melo Mini 3 Coil System
    • 0.3 ohm Kanthal Coil (30 to 80W)
    • 0.5 ohm Kanthal Coil (30 to 100W)
  • Invisible Airflow Control
  • Heat Insulated Drip Tip
  • Eleaf iStick Pico 75W TC Starter Kit Box Content

Box Content: Eleaf iStick Pico 75W TC Starter Kit

  • 1 x iStick Pico MOD (without 18650 battery)
  • 1 x Eleaf Melo 3 (Mini)
  • 1 x Eleaf EC 0.3ohm Head
  • 1 x Eleaf EC 0.5ohm Head
  • 4 x Seal ring
  • 1 x USB Cable
  • 1 x User Manual