Add these products
Open 7 Days
2 Helm Crt
Epping VIC 3076
Monday – Friday: 11:00AM – 08:00PM
Saturday: 10:00AM – 04:00PM
Sunday: 11:00AM – 03:00PM
The coils are made with Nichrome 80 and have an internal diameter is 3mm. The Super Aliens 0.11ohm coil configuration is 2 x 0.3 (28GA) + 0.1 x 0.3 (38GA x 28GA) and the resistance is approximately 0.11ohms for a dual coil build. This coil configuration has a stack of 7 ribbon wires (0.1 x 0.3) in the center of the coil, with one 28GA wire on either side of the stack and then the stack of ribbon wires and the two 28GA wires on either side are all wrapped with a wavy 38GA wire. The wavy wire is pre-prepared by wrapping the 38GA wire around another single wire and then removing this 38GA wire from the wrap and scratching it out before using it again to make the wrap on the alien coil.
Note: These coils are specifically made for dual coil builds. The specified resistance of these coils is for a dual coil build. It is not recommended to use these coils for a single coil build, as the resistance will be extremely low.
3 in stock
PRODUCT WARRANTY, RETURNS AND REFUNDS
Our products are covered by a manufacturer’s warranty. The manufacturer’s warranty period varies for different products and information about the product warranty can be found in the products packaging or the product box. The warranty period starts once the product has been posted to you or you have received it from our physical store. The warranty covers manufacturers defects only. The list below includes, but is not limited to, products that are not covered by the manufacturer warranty.
Faulty products are to be sent back to us within the warranty period at your own expense or returned to our physical store. We do not repair products and we act as liaison between you and the product manufacture if you return a product that is faulty. This process involves sending the product back to the manufacturer or demonstrating the product fault to the manufacturer via video link. The manufacturer’s technical department then determines the cause of the fault and if the fault is caused due to a genuine manufacturer default a replacement product or refund is provided by the manufacturer. A replacement product can be collected from our physical store or it will be sent to you at our cost. This process can take between 3 days and 4 weeks depending on the product and the manufacturer. Refunds will be processed promptly and payment made by the same method that you made payment.
We do not refund or exchange products that are in good working under any circumstances if they have been used. This is due to the hyenine concerns relating to handling and reselling vaporizers and e-cigarettes that have been used.
Returned products must be presented with proof of purchase date (receipt) and the original product packaging (with product serial number).
Unopened goods will be refunded in full.
Products that are returned outside the manufacturer’s warranty period (and are within the time limit set out by Australian Consumer Law) require additional time to process a warranty. Claims made outside the manufacturer’s warranty period may not be accepted and can take longer than 4 weeks to process as the manufacturer requires additional time to investigate the cause of the fault. A reasonable explanations will be provided if the warranty claim is rejected.
We offer free express shipping on orders over $150. A $10 flat rate express post shipping fee applies on orders less than $150. We currently use Australia Post Express shipping and a tracking number is emailed once the order is posted. However, Australia Post is often slow to update their tracking details and sometimes the shipment status goes from 'pending' straight to 'delivered' without any updates in between. On average orders take 2 to 3 days to reach their destination. In the Melbourne area it is often next day.
Li-ion batteries are dangerous and can explode when used improperly.
Only logged in customers who have purchased this product may leave a review.