- Shop
- Handmade Coils - Framed Staple Alien 0.12ohm
Handmade Coils - Framed Staple Alien 0.12ohm
MOST PEOPLE BUY THESE PRODUCTS TOGETHER
Related Links
Handmade Coils – Framed Staple Alien 0.12ohm
Each pack contains 2 handmade coils. The coils are made with Nichrome 80 and have an internal diameter is 3mm. The Framed Staple Alien 0.12ohm coil configuration is 2 x 28/4 x (0.4 x 0.1)/38G and the resistance is approximately 0.12ohms for a dual coil build. This coil configuration has a stack of 4 ribbon wires (0.4 x 0.1) in the center of the coil, with one 28GA wire on either side of the stack (framed) and then the stack of ribbon wires and the two framed 28GA wires on either side are all wrapped with a wavy 38GA wire. The wavy wire is pre-prepared by wrapping the 38GA wire around another single wire and then removing this 38GA wire from the wrap and scratching it out before using it again to make the wrap on the alien coil.
Note: The specified resistance of these coils is for a dual coil build. If you’re building on a single coil atomizer, the resistance of one coil will ohm out at twice the specified resistance.
REVIEWS
There are no reviews yet.