- Shop
- DynaVap DynaTec Apollo 2 Induction Heater
DynaVap DynaTec Apollo 2 Induction Heater
MOST PEOPLE BUY THESE PRODUCTS TOGETHER
DynaVap DynaTec Apollo 2 Induction Heater
Introducing the DynaVap DynaTec Apollo 2 Induction Heater. The Apollo 2 wall powered Induction Heater is designed and engineered by DynaTec, specifically for use with the DynaVap VapCap. Heating your Cap is so much easier than using a jet lighter. Enjoy smooth, fast, and consistent heating, in just 5 to 8 seconds with either the stainless steel or titanium tips (Caps). To operate the Apollo 2, just lightly press the Cap of your vaporizer into the chamber until a red heating light appears and hold until you hear the familiar ‘CLICK’. A momentary tactile switch is built into the chamber to ensure the heater is only activated when a VapCap is inserted with light pressure.
An automatic shutoff feature limits heating to a maximum of 15 seconds at a time. This unit features a durable, full-colour printed cover with an authentic DynaVap magnet on the top.
Learn more about how DYNAVAP Vaporizers work? Checkout our article: HOW TO USE YOUR DYNAVAP VAPORIZER.
Please Note: The DynaVap DynaTec Apollo 2 Induction Heater comes with an international wall socket. Please use the included AUD adaptor to plug the unit into the wall socket.
How To Use The DynaVap DynaTec Apollo 2 Induction Heater
The Apollo 2 Induction Heater is for sure easier to use than heating your vaporizer with a jet lighter, but there is still a bit of a learning curve. For example, with the first heat cycle a couple of extra seconds of heating is required to get the Cap to the required heat for vaping. Consequent heat cycles once there is some heat in your Cap require less heating so stopping at the ‘CLICK’ is usually the way to go. But, of course a bit of experimentation is always helpful just to find that sweet spot.
Steps To Using The DynaVap DynaTec Apollo 2 Induction Heater
- Plug the Apollo 2 Induction Heater into the wall and push the switch on the back of the unit.
- Load your Dynavap vaporizer as you normally would.
- Push your Dynavap vaporizer Cap into the induction heater. There is a button inside the induction that gets pressed in when your Cap is inserted. This is what engages the heater. A red light will signal the heater is active.
- Once that awesome ‘CLICK’ is heard you are ready to inhale. And remember sometimes an extra couple of seconds is necessary to get what you are after.
- Repeat steps 3 and 4 until your session is completed.
In The Box: DynaVap DynaTec Apollo 2 Induction Heater
- 1 x DynaVap DynaTec Apollo 2 Induction Heater
- 1 x Quick Start Guide
- AUS Adaptor (added separately)
REVIEWS
There are no reviews yet.