Storz & Bickel
  1. Shop
  2. Crafty+ (Plus) Vaporizer
0 review

Crafty+ (Plus) Vaporizer

* Select out-of-stock item to add notification
1
Buy Now Pay Later
SKU: CraftyPlusVaporizer

MOST PEOPLE BUY THESE PRODUCTS TOGETHER

Related Links

Crafty+ (Plus) Vaporizer

This device is made in Germany and stands with the best dry herb vaporizers on the market. The in-built battery powered CRAFTY (Plus) Vaporizer is, without a doubt, the perfect portable vaporizer for on the go. The CRAFTY (Plus)’s factory settings are already optimal for immediate use. However, you can easily make changes using the Android App.

Please Note: The STORZ & BICKEL App is currently not available on the Apple App Store. There is an App available for Android. However, settings on the CRAFTY Vaporizer can now also be adjusted through the WebApp using your computer.

Crafty (Plus) Vaporizer Features:

  • 30% faster heat-up
  • Great new slick design for comfortable grip and feel
  • Improved housing material
  • Super-Boost: Triple-pressing power button gets you to max. temperature of 210°C (410°F)
  • Improved electronics and optimized circuit board
  • 2 year warranty 1 year warranty upon registration

In The Box

  • 1 x CRAFTY Vaporizer
  • 1 x USB Cable
  • 3 x Base Seal Ring, small
  • 3 x Normal Screen, small
  • 3 x Coarse Screen, small
  • 2 x Drip Pad, small
  • 1 x Dosing Capsule
  • 1 x Cleaning Brush
  • 1 x Instruction Manual
  • 1 x Safety Instructions Manual

How To Use: Crafty+ (Plus) Vaporizer

Please read the instructions provided in the box before using the Storz & Bickel Crafty+ Plus Vaporizer.

Step 1: Charging the battery

Fully charge the battery before first use. Connect the vaporizer to a USB charger or computer using the USB-C cable supplied. Once it is connected to the charger, the device will vibrate and lighting up the display. Ascending flashing charge status fields and as soon as the battery is fully charged, all six charge status fields are visible.

Step 2: Filling the chamber

Unscrew the cooling unit from the vaporizer by turning it 90°  counterclockwise. Fill the chamber completely with your material up to the plastic rim. Excessively compressed material or an overfilled Filling chamber makes inhalation more difficult. Screw the cooling unit onto the vaporizer by turning 90 degrees clockwise.

Step 3: Heating up/switching on the device

Press the orange ON/OFF switch for at least half a second. The vaporizer will vibrate and display will light up. The display indicates the heating process by showing the set and actual temperatures. This process can take up to two minutes. A double vibration signal indicates that the basic temperature has been reached. The vaporizer offers two factory preset temperature levels (180°c and 195°c).

Step 4: Inhaling

Once the heating process is complete, start vaporizer immediately. Fold out the mouthpiece and inhale evenly for a few seconds and only half as much as possible.

How To Clean: Crafty+ (Plus) Vaporizer

Step 1: Disassembling the Cooling units

Cooling unit with mouthpiece must be free of deposits. Deposits on the inside of the cooling unit are caused by steam condensate. Cleanliness is a prerequisite for proper function. Heat up the cooling unit for better disassembly, as the steam condensate can be sticky.  Pull the cap lock towards the mouthpiece and pull the cooling unit cap off the vaporizer. Remove the mouthpiece out of the cooling unit cap while slightly tilting it back and forth. Pull off the mouthpiece seal ring. When cleaning the cooling unit cap in isopropyl alcohol, remove the cap lock by pulling it up on one side.

Unscrew the cooling unit base from the vaporizer by turning it 90°c counterclockwise. Lever out the large base seal ring with filling chamber tool at the recess in the groove. Remove the small base seal ring and press the screen with the filling chamber tool from the top to the bottom out of the cooling unit base.

Step 2: Cleaning the cooling unit and the filling chamber screen

Use cleaning brush and cotton swabs and paper or cotton cloths for manual cleaning. Utilize warm rinsing water or isopropyl alcohol as a solvent. Clean the filling chamber screen and the screen of the cooling unit with the cleaning brush after each vaporization.

Place all parts in warm rinsing water for at least five minutes and rinse all parts under running water for at least one minute. Let all parts dry completely.

 

REVIEWS

Star Rating

There are no reviews yet.

RELATED PRODUCTS

STORZ and BICKEL-Volcano Easy Valve Wear and Tear Set-Vape Australia-2bSTORZ and BICKEL-Volcano Easy Valve Wear and Tear Set-Dry Herb Vape Australia-2b
Storz & Bickel
0 review

Storz & Bickel - Volcano Easy Valve Wear & Tear Set

Maintenance Kit - Vaping Dry Herb- Vape AustraliaMaintenance Kit – Beauty – Vape Australia
Leaf House Accessories
1 review

Maintenance Kit - Dry Herb Accessories

Utillian 5 - Scoop Drip Tip-WAX coil-Dry Herb Vape Shop Australia-2aUtillian 5 - Scoop Drip Tip-WAX coil-Vape Shop Australia-2a
UtillianOut Of Stock